| A. CUTTING,GRINDING & SHARING FACILITIES |
|
| (a) Pug Machine |
15 nos |
| (b) Gas Cutting Sets |
15 nos |
(c) Hand Shearing Cutter
|
5 nos |
| (d) Bench Grinders |
2 nos |
| (e) Hand Grinders(Angle, Straight) |
20 nos |
| (f) Power Hack Saw |
2 nos |
| (g) Plasma Arc cutting |
1 nos |
| B. BENDING FACILITIES |
 |
| (a) Bend Role 2 m wide 20 mm cap Lloyds
With pre-Punching facility |
1 no |
| (b) Bend Roll 2.5 m wide upto 32mm Capacity |
1 no |
| (c) Bend Roll2.0 m wide 25 mm capacity |
1 no |
| (d) Bend Roll 1.5 m wide 10 mm capacity |
2 nos |
| (f) Section Bending Machine, Haussler, German |
1 no. |
| (g) Tube bending machine (Gressel 80 NB) |
1 no. |
| C. WELDING FACILITY |
|
| (a) Submerged Arc Welding m/s 800 Amp. |
1 no |
| (b) Argon Arc Welding Set (Advani & Quality) |
2 nos |
| (c) Motor Generator Welding Set (Advani) |
4 no. |
| (d) Welding Rectifier 400/600 Amp |
10 nos |
| (e) Brazing (Cutarc) |
2 nos |
| (f) Aluminum Welding Set |
2 nos |
| (g) Spot Welding Machine |
1 no. |
| (h) Welding Rotor Motorized 40 Ton Cap |
5 Sets |
| (i) Welding Rotor manual 2-10 tonCap |
5 sets |
| (j) MIG Welding Machine |
15 Sets |
| D. DIESEL GENERATING SETS |
|
| (a) 125 KVA, 75KVA & 65KVA |
1 no. each |
| E. PRESSING & PUNCHING |
|
| (a) Hand Press |
3 nos. |
| F. HANDLINGFACILITY |
|
| (a) Mobile Crane(10 MT) |
(Under contract)1 no. |
| (b) EOT Crane (20 MT) |
1 no |
| (c) Jib crane (2 MT) |
2 nos |
| (d) Chain Pully Block (Assorted) |
6 nos’ |
| (e) Winch (15MT) |
3 nos |
| G. DRILLING MACHINE |
|
| (a) Radial Drill (Imported ,BVR-5) |
1 no |
| (b) Redial Drill (upto 30mm) |
1 no |
| (c) Maganic Drilling Machine (25 mm) |
4 nos |
| (d) Hand Drilling Machine |
5 nos |
| H.SURFACE TREATMENT |
|
| (a) Sand Blasting Unit |
1 no |
| (b) Air Compressor |
1 no Each |
| (C) Painting Unit |
1 no |
| (d) Buffing &Polishing |
1 no. |
| I. TESTING EQUIPMENTS |
|
| (a) Hydraulic Pump |
1 no |
| (b) Vacuum Pump |
1 no |
| (c) D.P. Test Facility |
As per Requirement. |
| J. MACHINE SHOP FACILITIES (with Associates) |
|
| (1) Floor Type Horizontal Boring Machine
Make: SHARMANN, GERMANY spindle dia 130 mm,
cross travel: 5500 mm Vertical trave: 1500 mm, rotary
table 2000 2000 mm. Accuracy 0.02 mm |
| (2) Table Type Horizontal Boring Machine Boring Machine
Make: ASCHARMAN, GERMANY, spindle dia 80mm,
Cross travel:1600 mm, Vertical travel 1350 mm, Long
travel:1300 mm. Accracy+0.01 mm |
| (3) Double Column Vertical Boring Machine
Make :Frriep, GERMANY, TABLE size;800 mm
Accuracy+0.01 mm |
| (4) Vertical Boring Machine
Make: Froriep, GERMANY, table size:800 mm
Accuracy 0.01 mm |
| (5) Horizontal Fine Boring machine with DRO
Make: SCHARMANN, Spindle dia 100 mm
XYZ 600 600 600 mm Accuracy, + 0.01 mm |
| (6) Cylindrical Grinding Machine
Make :JOHANNSONS, SWEEDEN
Capacity:1000 1500 mm, Accuracy +0.005 mm |
| (7) Cylindrical Grinding machine
Make: CC, BELGIUM, Capacity :250 1000 mm
Accuracy+0.0005 mm |
| (8) Internal Grinding Machine
Make: Fortuna, GERMANY Capacity:250 1000 mm
Accuracy +0.005 mm |
| (9) Vertical Jig Boring Machine
Make : Fortuna, GERMANY Capacity:250 100
Accuracy + 0.01 mm |
| (10) Vertical jig Boring machine
Make; GSP, FRANCE,XYZ 900 300 300 |
| (11) Production Milling Machine
Make: FRITZ WERNER, GERMANY
Accuracy+ 0.02mm |
| (12) Universal Milling Machine
Make: FRITZ WERNER, GERMANY
Accuracy+ 0.01 mm |
| (13) Universal Milling Machine
Make: WWW, GERMANY, Table size 1100 200
Accuracy + 0.01 mm |
| (14) Vertical Milling Machine
Make: PARKSON, ENGLAND, Table Size 1300 310
Accuracy + 0.01 mm |
| (15) Duplex Milling
Make: FRITZ WENER, GERMANY |
| (16) Shaping Machine
Make: WWW, GERMANY ,Stoke 800 mm |
| (17) Radial Drilling Machine
Make: RUSSAN Capacity 40 mm |
| (18) Copy Milling Machine
Make: G. VERNIER, GERMANY
Table Size:300 1500 mm. Accuracy + 0.02 mm |